• Burdett, D., Hambidge, C., Povey, T., “Analysis of ultra-low uncertainty gas turbine flow capacity measurement techniques”, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2020 DOI link for publication (opens in a new tab)
  • Messenger, A., and Povey, T. , “Calibrated Low-Order Transient Thermal and Flow Models for Robust Test Facility Design”, Journal of the Global Power and Propulsion Society, 4, pp.94-113, 2020 DOI link for publication (opens in a new tab)
  • Michaud, M., Ornano, F., Chowdhury, N. H. K., and Povey, T., “Methodology for High-Accuracy Infrared Calibration in Environments with Through-Wall Heat Flux”, Journal of the Global Power and Propulsion Society, 4, pp.1-13. , 2020 DOI link for publication (opens in a new tab)
  • Ornano, F., Povey, T., “Theory of non-dimensional groups in film effectiveness studies”, Journal of Turbomachinery, vol 142, issue 4, art No 41002, 2020 DOI link for publication (opens in a new tab)
  • Ornano, F., Povey, T., “Combined scalar tracking, computational fluid dynamics, and multi-objective genetic algorithm method to accelerate optimization of film cooling systems”, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2020 DOI link for publication (opens in a new tab)
  • Usandizaga, I., Beard, P., Chana, K., Povey, T., “Heated thin film gauge arrangements to reduce uncertainty in transient heat transfer measurements”, Measurement Science and Technology, vol 32, issue 1, art No 15906, 2020 DOI link for publication (opens in a new tab)
  • Hall, B.F., Povey, T., “A practical model for pressure probe system response estimation (with review of existing models)”, Measurement Science and Technology, vol 29, issue 4, art No 45301, 2018 DOI link for publication (opens in a new tab)
  • Beard, P.F., Adams, M.G., Nagawakar, J.R., Stokes, M.R., Wallin, F., Cardwell, D.N., Povey, T., Chana, K.S., “The lemcotec 1½ stage film-cooled HP turbine: Design, integration and testing in the Oxford turbine research facility”, 13th European Turbomachinery Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2019, 2019 DOI link for publication (opens in a new tab)
  • Doganay, O., Matin, T., Chen, M., Kim, M., McIntyre, A., McGowan, D.R., Bradley, K.M., Povey, T., Gleeson, F.V., “Time-series hyperpolarized xenon-129 MRI of lobar lung ventilation of COPD in comparison to V/Q-SPECT/CT and CT”, European Radiology, vol 29, issue 8, pp 4058-4067, 2019 DOI link for publication (opens in a new tab)
  • Kim, M., Doganay, O., Matin, T.N., Povey, T., Gleeson, F.V., “CT-based Airway Flow Model to Assess Ventilation in Chronic Obstructive Pulmonary Disease: A pilot study”, Radiology, vol 293, issue 3, pp 666-673, 2019 DOI link for publication (opens in a new tab)
  • Parker, J.A., Romero, E., Povey, T., “A modular transonic turbine cascade for cooled rotor metal effectiveness investigations”, Proceedings of the ASME Turbo Expo, 5A-2019, 2019 DOI link for publication (opens in a new tab)
  • Ten, J.S., Povey, T., “Self-excited fluidic oscillators for gas turbines cooling enhancement: Experimental and computational study”, Journal of Thermophysics and Heat Transfer, vol 33, issue 2, pp 536-547, 2019 DOI link for publication (opens in a new tab)
  • Collins, M., Chana, K., Povey, T., “Application of film cooling to an unshrouded high-pressure turbine casing”, Journal of Turbomachinery, vol 139, issue 6, art No 61010 , 2017 DOI link for publication (opens in a new tab)
  • Hall, B.F., Povey, T., “The Oxford Probe: An open access five-hole probe for aerodynamic measurements”, Measurement Science and Technology, vol 28, issue 3, art No 35004, 2017 DOI link for publication (opens in a new tab)
  • Kirollos, B., Lubbock, R., Beard, P., Goenaga, F., Rawlinson, A., Janke, E., Povey, T., “ECAT: An engine component aerothermal facility at the University of Oxford”, Proceedings of the ASME Turbo Expo, 2A-2017, 2017 DOI link for publication (opens in a new tab)
  • Kirollos, B., Povey, T., “Method for accurately evaluating flow capacity of individual film-cooling rows of engine components”, Journal of Turbomachinery, vol 139, issue 11, art No 111004, 2017 DOI link for publication (opens in a new tab)
  • Kirollos, B., Povey, T., “High-accuracy infra-red thermography method using reflective marker arrays”, Measurement Science and Technology, vol 28, issue 9 art No 95405, 2017 DOI link for publication (opens in a new tab)
  • Kirollos, B., Povey, T., “Laboratory infrared thermal assessment of laser-sintered high-pressure nozzle guide vanes to derisk engine design programs”, Journal of Turbomachinery, vol 139, issue 4, art 41009, 2017 DOI link for publication (opens in a new tab)
  • Luque, S., Jones, T.V., Povey, T., “Effects of coolant density, specific heat capacity, and biot number on turbine vane cooling effectiveness”, Journal of Turbomachinery, vol 139, issue 11, art No 111005, 2017 DOI link for publication (opens in a new tab)
  • Luque, S., Jones, T.V., Povey, T., “Scaling of turbine metal temperatures in cooled compressible flows-experimental demonstration of a new theory”, Journal of Turbomachinery, vol 139, issue 8, art No 81001, 2017 DOI link for publication (opens in a new tab)
  • Ornano, F., Povey, T., “Experimental and computational study of the effect of momentum-flux ratio on high-pressure nozzle guide vane endwall cooling systems”, Journal of Turbomachinery, vol 139, issue 12, art No 121002, 2017 DOI link for publication (opens in a new tab)
  • Ornano, F., Povey, T., “Experimental & computational study of the effect of momentum-flux ratio on high pressure ngv endwall cooling systems”, Proceedings of the ASME Turbo Expo, 5A-2017, 2017 DOI link for publication (opens in a new tab)
  • Thomas, M., Povey, T., “Improving turbine endwall cooling uniformity by controlling near-wall secondary flows”, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol 231, issue 14, pp 2689-2705, 2017 DOI link for publication (opens in a new tab)
  • Wang, D., Ornano, F., Li, Y.S., Wells, R., Hjalmarsson, C., Hedlund, L., Povey, T., “FLOvane: A new approach for high-pressure vane design”, Journal of Turbomachinery, vol 139, issue 6, art No 61002, 2017 DOI link for publication (opens in a new tab)
  • Collins, M., Chana, K., Povey, T., “Application of film cooling to an unshrouded hp turbine casing”, Proceedings of the ASME Turbo Expo, 5C-2016, 2016 DOI link for publication (opens in a new tab)
  • Johansson, M., Povey, T., Chana, K., Abrahamsson, H., 2016, “Effect of low-NOx combustor swirl clocking on ITD vane aerodynamics with upstream HPT stage – An experimental and computational study,” ASME Journal of Turbomachinery, TURBO-16-1005-1 DOI link for publication (opens in a new tab)
  • Kirollos, B., Povey, T., “Laboratory infra-red thermal assessment of laser-sintered high-pressure nozzle guide vanes to de-risk engine design Programmes”, Proceedings of the ASME Turbo Expo, 5A-2016, 2016 DOI link for publication (opens in a new tab)
  • Luque, S., Jones, T.V., Povey, T., 2016, “Theory for the scaling of metal temperatures in cooled compressible flows,” International Journal of Heat and Mass Transfer, Volume 102, November 2016, Pages 331–340.
  • Collins, M.C.J., Chana, K., Povey, T., 2016, “Improved Methodologies for Time Resolved Heat Transfer Measurements Demonstrated on an Unshrouded Transonic Turbine Casing,” May 17, 2016, ASME J. Turbomach 138(11), 111007, Paper No: TURBO-16-1051; DOI link for publication (opens in a new tab)
  • Kirollos, B., Povey, T., 2016, “Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance,” ASME. J. Turbomach., 138(8):081002-081002-12. DOI link for publication (opens in a new tab)
  • Kirollos, B., Povey, T., 2016, “Cooling Optimization Theory—Part II: Optimum Internal Heat Transfer Coefficient Distribution,” ASME. J. Turbomach., 138(8):081003-081003-15. DOI link for publication (opens in a new tab)
  • Wang, D., Ornano, F., Sheng Li, Y., Wells, R., Hjalmarsson, C., Hedlund, L., Povey, T., “FL Ovane: A new approach for HP vane design”, Proceedings of the ASME Turbo Expo, 2C-2016, 2016 DOI link for publication (opens in a new tab)
  • Thomas, M., Povey, T., 2015, “A novel scalar tracking method for optimising film cooling systems,” Proc. IMechE Part A: J. Povey and Energy, 2015 DOI link for publication (opens in a new tab)
  • Kirollos, B., Povey, T., 2015, “An Energy-Based Method for Predicting the Additive Effect of Multiple Film Cooling Rows,” J. Eng. Gas Turbines Power 137(12), 122608 (Dec 01, 2015) DOI link for publication (opens in a new tab)
  • Collins, M., Povey, T., 2015, “Exploitation of Acoustic Effects in Film Cooling,” J. Eng. Gas Turbines Power, Vol. 137, Issue 10, pp. 102602-102602-9. DOI link for publication (opens in a new tab)
  • Collins, M., Chana, K., Povey, T., 2015, “New technique for the fabrication of miniature thin film heat flux gauges,” Journal of Meas. Sci. Technol. 26 025303 DOI link for publication (opens in a new tab) [OPEN ACCESS]
  • Hall, B.F., Chana, K.S., Povey, T., 2014, “Design of a Non-Reacting Combustor Simulator With Swirl and Temperature Distortion With Experimental Validation,” Journal of Engineering for Gas Turbines and Power, August 2014, Vol. 136 / 081501-1. DOI link for publication (opens in a new tab)
  • Kirollos, B., Povey T., 2014, “Reverse-Pass Cooling Systems for Improved Performance,” ASME. J. Turbomachinery, 136(11):111004-111004-10. DOI link for publication (opens in a new tab)
  • Beard, P.F., Smith, A.D., Povey, T., 2014, “Effect of combustor swirl on transonic HP turbine efficiency,” ASME Journal of Turbomachinery, January 2014, Vol. 136 / 011002-1. DOI link for publication (opens in a new tab)
  • Luque, S., Batstone, J., Gillespie, D.R.H., Povey, T., Romero, E., 2014, “Full Thermal Experimental Assessment of a Dendritic Turbine Vane Cooling Scheme,” ASME Journal of Turbomachinery, February 2014, Vol. 136 / 021011-1
  • Beard, P.F., Smith, A., and Povey, T., 2013, “Impact of severe temperature distortion on turbine efficiency,” ASME J Turbo., January 2013, Vol. 135 / 011018-1 DOI link for publication (opens in a new tab)
  • Qureshi, I., Smith, A.D., Povey, T., 2013, “HP vane aerodynamics and heat transfer in the presence of aggressive inlet swirl,” ASME J Turbo., March 2013, Vol. 135 / 021040-1 DOI link for publication (opens in a new tab)
  • Qureshi, I., Beretta, A., Chana, K.S., Povey, T., 2012, Effect of aggressive inlet swirl on the heat transfer and aerodynamics in an unshrouded transonic HP turbine,” ASME J Turbo., November 2012, Volume 134, Issue 6, 061023 (11 pages) DOI link for publication (opens in a new tab)
  • Povey, T., Paniagua, G., 2012, “Method to improve precision of rotating inertia and friction measurements in turbomachinery applications,” Journal of Mechanical Systems and Signal Processing 30 (2012) 323–329 DOI link for publication (opens in a new tab)
  • Salvadori, S., Montomoli, F., Martelli, F., Chana, K.S., Qureshi, I., Povey, T., 2012, Analysis of the effect of a non-uniform inlet temperature profile on the heat transfer and fluid flow in turbine stages,” ASME J Turbo, Jan 2012, Vol. 134, 011012-1 DOI link for publication (opens in a new tab)
  • Qureshi, I., Smith, A.D., Chana, K.S., Povey, T., 2012, “Effect of Temperature Nonuniformity on Heat Transfer in an Unshrouded Transonic HP Turbine: An Experimental and Computational Investigation”. J. Turbomach. — January 2012 — Volume 134, Issue 1, 011005 (12 pages) DOI link for publication (opens in a new tab)
  • Beard, P.F., Smith, A.D., Povey, T., 2011, “Experimental and computational fluid dynamics investigation of the efficiency of an unshrouded transonic high pressure turbine,” Proc. IMechE, Part A: Journal of Power and Energy, December 2011 vol. 225 no. 8 1166-1179 DOI link for publication (opens in a new tab) (IMechE Harold Disney Prize 2011 winner: a prize to be awarded for the best paper on a power industries mechanical engineering subject published by the Institution in previous year.)
  • Beard, P.F., Povey, T., 2011, “Direct shaft torque measurements in a transient turbine facility, Meas. Sci. Technol. 22 (2011) 035107 (10pp) doi:10.1088/0957-0233/22/3/035107 (was selected for inclusion in the exclusive Measurement Science and Technology (MST) ‘Highlights of 2011-2012’ collection).
  • Qureshi, I., Beretta, A., Povey, T., 2011, “Effect of Simulated Combustor Temperature Nonuniformity on HP Vane and Endwall Heat Transfer: An Experimental and Computational Investigation,” J. Eng. Gas Turbines Power — March 2011 — Volume 133, Issue 3, 031901 (13 pages) DOI link for publication (opens in a new tab)
  • Qureshi, I., Povey, T., 2011, “A Combustor-Representative Swirl Simulator for a Transonic Turbine Research Facility” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering June 6, 2011 0954410011400817
  • Luque, S., Povey, T., 2011 “A Novel Technique for Assessing Turbine Cooling System Performance,” ASME Journal of Turbomachinery, July 2011, Vol.133, Issue 3 DOI link for publication (opens in a new tab)
  • Povey, T., Sharpe, M., Rawlinson, A., 2011, “Experimental Measurements of Gas Turbine Flow Capacity Using a Novel Transient Technique, ASME J. Turbomachinery January 2011, Volume 133, Issue 1 DOI link for publication (opens in a new tab)
  • Beard, P.F., and Povey, T., 2010, “Direct shaft torque measurements in a transient turbine facility,” Journal Meas. Sci. Technol. 22 (2011) 035107 (10pp) DOI link for publication (opens in a new tab)
  • Beard, P.F., Povey, T., Chana, K.S., 2010, “Turbine Efficiency Measurement System for the QinetiQ Turbine Test Facility,” ASME J. Turbomachinery, January 2010, Volume 132, Issue 1, 011002 (13 pages) DOI link for publication (opens in a new tab)
  • Povey, T., “Effect of Film Cooling on Turbine Capacity, J. Eng. Gas Turbines Power, January 2010 — Volume 132, Issue 1, 011901 (10 pages) DOI link for publication (opens in a new tab)
  • Povey, T., Qureshi, M.I., 2009, “Developments in Hot-Streak Simulators for Turbine Testing,” ASME J. Turbomachinery, July 2009, Vol. 131, Issue 3, DOI link for publication (opens in a new tab)
  • Beard, P.F., Povey, T., Ireland, P.T., 2008, “Mass flow rate measurement in a transonic turbine test facility with temperature distortion and swirl,” Journal of Flow Measurement and Instrumentation, Vol. 19, Issue 5, October 2008, pp. 315-324, DOI link for publication (opens in a new tab)
  • Povey, T., Beard, P.F., 2008, “A novel experimental technique for accurate mass flow rate measurement,” Journal of Flow Measurement and Instrumentation, Vol.19, Issue 5, October 2008, pp. 251-259 DOI link for publication (opens in a new tab)
  • Povey, T., Oldfield, M.L.G., Haselbach, F., 2008, “Transonic turbine vane tests in a new miniature cascade facility,” Proc. IMechE Part A Journal of Power and Energy, Vol. 222, No. 5, 2008, pp. 529-539 (11).
  • Povey, T., Qureshi, M. I., 2008, “A hot-streak (combustor) simulator suited to aerodynamic performance measurements,” Journal Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, ISSN 0954-4100, Vol. 222, Number 6/2008, pp 705-720 DOI link for publication (opens in a new tab)
  • Povey, T., Chana, K.S., Jones, T.V., Hurrion, J., 2007, “The Effect of Hot-Streaks on HP Vane Surface and Endwall Heat Transfer: An Experimental and Numerical Study,” ASME Journal of Turbomachinery, January 2007, Volume 129, Issue 1, pp. 32-43.
  • Povey, T., Jones, T.V., Oldfield, M.L.G., 2007, On a Novel Annular Sector Cascade Technique, ASME Journal of Turbomachinery — January 2007 — Volume 129, Issue 1, pp. 175-183.
  • Povey, T., Chana, K.S., Jones, T.V., 2003, “Heat transfer measurements on an intermediate pressure nozzle guide vane tested in a rotating annular turbine facility – and the modifying effects of a non-uniform inlet temperature profile,” Proc. Instn. Mech. Engrs. Vol. 217 Part A: Journal of Power and Energy, pp. 421-431.
  • Povey, T., Chana, K.S., Jones, T.V., Oldfield, M.L.G., 2003, “The design and performance of a transonic flow deswirling system – an application of current CFD design techniques tested against model and full-scale experiments.” In: (Editors) Elder, R.L., Tourlidakis, A., Yates, M.K., “Advances of CFD in fluid machinery design,” IMechE Professional Engineering Publishing: pp. 65-94, ISBN 1 8058 353 9.